Yingkou Jinchen Machinery Co., Ltd. freeworldtrade.info
Contact Person:Ms. Angela ZhanStreet Address:Gaizhou, Yingkou, Yingkou City, Liaoning, China
City:Yingkou
Province/State:Liaoning
Country/Region:China
Zip:115000
Telephone:86-417-2901977
Fax:86-417-2901516
Website: http://www.freeworldtrade.info/yingkou_jinchen_machinery_co_ltd_company50144449.html
Reference Material:
Selected Products of Yingkou Jinchen Machinery Co., Ltd.
Glass Edge-grinding Machine
This machine is used for guinding the edge of glass to make it blunt, so as to avoiddamage to operator, reduce glass dilapidation and the other parts as well. Thismachine is suitable to glass with different specification and thickness.
This machine is used for guinding the edge of glass to make it blunt, so as to avoiddamage to operator, reduce glass dilapidation and the other parts as well. Thismachine is suitable to glass with different specification and thickness.
Insulating glass production li
Adopt halogen heating pipe , high heating efficiency, longer life.Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive.Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed.The incubator produced by the resistant high temperature material is to prevent heat loss.Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy.The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.
Adopt halogen heating pipe , high heating efficiency, longer life.Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive.Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed.The incubator produced by the resistant high temperature material is to prevent heat loss.Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy.The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.
Single cutting saw
Adopt the turntable location technology, high cutting precision.Adopt the pneumatic clamping mechanism,claming operation reliable and quick.The shaft is made of high-quality carbon structral steel, good endurance.With the supporting mechanism of equivelent length, convenient feed and location . The saw head do fixed axis cycloid feed on the worktables vertical side,cutting operation stable and reliable.Main specification & Technical data:Power:380V/220V 50HZRated power:1.1KWSpindle speed:3200rpmFeed speed:AdjustableSpecification of saw blade: φ350×3.0×30mmAir pressure:0.4-0.6MpaAir consumption:50L/minCutting width: 200mm90° 170mm45°Cutting height:100mmCutting length: 0-6mCutting precision: ±15Outline size:4500×830×1450mm(LxWxH)Weight:220KGMain accessory: Saw blade------Japan Tianlong Solenoid valve------ Japan Kogane Cylinder------Shanghai Xinyi Motor----Japan High-quality carbon structral steel-----Angang Made Air-way connected body----Shanghai Xinyi PU pipe-----Shanghai Suonuo Spindle bearing----Japan NSK Triangle belt-----Taiwan Jiaoli Cleaning dust gun----- Wenzhou Sannaisi
Adopt the turntable location technology, high cutting precision.Adopt the pneumatic clamping mechanism,claming operation reliable and quick.The shaft is made of high-quality carbon structral steel, good endurance.With the supporting mechanism of equivelent length, convenient feed and location . The saw head do fixed axis cycloid feed on the worktables vertical side,cutting operation stable and reliable.Main specification & Technical data:Power:380V/220V 50HZRated power:1.1KWSpindle speed:3200rpmFeed speed:AdjustableSpecification of saw blade: φ350×3.0×30mmAir pressure:0.4-0.6MpaAir consumption:50L/minCutting width: 200mm90° 170mm45°Cutting height:100mmCutting length: 0-6mCutting precision: ±15Outline size:4500×830×1450mm(LxWxH)Weight:220KGMain accessory: Saw blade------Japan Tianlong Solenoid valve------ Japan Kogane Cylinder------Shanghai Xinyi Motor----Japan High-quality carbon structral steel-----Angang Made Air-way connected body----Shanghai Xinyi PU pipe-----Shanghai Suonuo Spindle bearing----Japan NSK Triangle belt-----Taiwan Jiaoli Cleaning dust gun----- Wenzhou Sannaisi
Double-Head Corner Combing Mac
This machine is used for corner punching and riveting combination of aluminum doors& windows.Two corner connecting at one time as available greatly increased the production.The pressing and locating machinsm can adjust in upper and lower direction,suitable for various kinds specification & section profile.The combing corner and feed operate at will,can highly reduce the inferior product ratio.Main specification & Technical data:Touch error:≤0.15mmPower:380V 50HZ (Three phase and four wire)Rated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.2L/timeTank capacity:40LMin distance of two head:450mmMax distance of two head:1800mmWidth of aluminum profile:100mmOutline size:2880X2300X1359mm(LxWxH)Weight:500KGMain accessory: 8mm thickness rectangular tube------Angang provide Hydraulic systemTaiwan gear pumpSolenoid valveSafety wire Round slideway brush------Korea Taiking Corner combing cutter
This machine is used for corner punching and riveting combination of aluminum doors& windows.Two corner connecting at one time as available greatly increased the production.The pressing and locating machinsm can adjust in upper and lower direction,suitable for various kinds specification & section profile.The combing corner and feed operate at will,can highly reduce the inferior product ratio.Main specification & Technical data:Touch error:≤0.15mmPower:380V 50HZ (Three phase and four wire)Rated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.2L/timeTank capacity:40LMin distance of two head:450mmMax distance of two head:1800mmWidth of aluminum profile:100mmOutline size:2880X2300X1359mm(LxWxH)Weight:500KGMain accessory: 8mm thickness rectangular tube------Angang provide Hydraulic systemTaiwan gear pumpSolenoid valveSafety wire Round slideway brush------Korea Taiking Corner combing cutter
Four-Head Corner Combing Machi
This machine was used for corner punching and riveting combination of aluminum doors/windows.Four corners connecting at one time as available greatly increased the production,wide profile processing range due to convenient corner combing cylinder setting ,suitable for various kinds high quality and high volume windows production. Complete safety procetion facilities, structural seal optimization design. Adop CNC system ,can relize automatic and accurate locating. The high-quality combing corner cutter head is made of alloy material,that make the combing corner performance accurate. The feed system adopts importd liner guideway and liner bearing,with anti- abrasion and high precision inherent quality. The machine body with durable, high accuracy and rigidity,small seismic stria,anti-permanent deformation.Main specification & Technical data:Power:380V/220V 50HZRated power:7.5KWRated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.45L/timeTank capacity:40LOil cylinder distance:0-50mmMax size:1800X3000mm(HxW)Min size:560X560(HxW)Width of aluminum profile:100mmWeight:1500KGOutline size:4700X2000X2600(LxWxH)
This machine was used for corner punching and riveting combination of aluminum doors/windows.Four corners connecting at one time as available greatly increased the production,wide profile processing range due to convenient corner combing cylinder setting ,suitable for various kinds high quality and high volume windows production. Complete safety procetion facilities, structural seal optimization design. Adop CNC system ,can relize automatic and accurate locating. The high-quality combing corner cutter head is made of alloy material,that make the combing corner performance accurate. The feed system adopts importd liner guideway and liner bearing,with anti- abrasion and high precision inherent quality. The machine body with durable, high accuracy and rigidity,small seismic stria,anti-permanent deformation.Main specification & Technical data:Power:380V/220V 50HZRated power:7.5KWRated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.45L/timeTank capacity:40LOil cylinder distance:0-50mmMax size:1800X3000mm(HxW)Min size:560X560(HxW)Width of aluminum profile:100mmWeight:1500KGOutline size:4700X2000X2600(LxWxH)
Corner Combing Machine for Alu
It is necessary equipment for processing aluminum and pvc door/window.It is used to make 90°corner,wide processing range, higher production effiency.It can meet the riveting need of all kinds aluminum profile. This machine adopts the optimization and innovation driving design,and the cutter of left and right will work at the same time. The machines travel is longer, avoiding the deformation in combing process,can make the window corner connection more firm.The national patent no.: ZL200420055488.5 The main slideway adopts advanced technology, good arts and crafts,higher accurancy. Adopting hydraulic pressure and pneumatic each controls the clamping and combing corner system,that the woking process is more smooth and reliable. According to the profiles need ,it can choose the single-pointdouble-point and multipoint corner combing cutter. The corner combing cutter can be adjusted in the upper and lower direction, saving time,convenient Wide processing range , increase the sliding ways travel , and increase the use of the cutter,the cutter travel is to 32mm, saving tool design and adjustment time.Main specification & Technical data:Touch error: ≤0.15mmPower:380V 50HZElectrical power:1.5KWRated oil pressure:16MpaAir pressure:0.5-0.8MpaAir consumption:2L/minTank capacity:20LWidth of aluminum profile:120mmOutline size:400KG
It is necessary equipment for processing aluminum and pvc door/window.It is used to make 90°corner,wide processing range, higher production effiency.It can meet the riveting need of all kinds aluminum profile. This machine adopts the optimization and innovation driving design,and the cutter of left and right will work at the same time. The machines travel is longer, avoiding the deformation in combing process,can make the window corner connection more firm.The national patent no.: ZL200420055488.5 The main slideway adopts advanced technology, good arts and crafts,higher accurancy. Adopting hydraulic pressure and pneumatic each controls the clamping and combing corner system,that the woking process is more smooth and reliable. According to the profiles need ,it can choose the single-pointdouble-point and multipoint corner combing cutter. The corner combing cutter can be adjusted in the upper and lower direction, saving time,convenient Wide processing range , increase the sliding ways travel , and increase the use of the cutter,the cutter travel is to 32mm, saving tool design and adjustment time.Main specification & Technical data:Touch error: ≤0.15mmPower:380V 50HZElectrical power:1.5KWRated oil pressure:16MpaAir pressure:0.5-0.8MpaAir consumption:2L/minTank capacity:20LWidth of aluminum profile:120mmOutline size:400KG
Glass Heating Roller Press Mac
It is the special equipment for processing the insulating glass of composite rubber strip.After installing the rubber strip between the two glass, by heating and rolling pressure ,to make the cavity of two empty glass obtain the lower of vacuum and dry static layer , the thickness and size reach the design standard of insulating glass. Adopt halogen heating pipe , high heating efficiency, longer life. Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive. Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed. The incubator produced by the resistant high temperature material is to prevent heat loss. Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy. The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.Main specification&Technical data:Power:380V 50HZTotal power:18.37KWMain drive power:0.37KWHeating power:18KWWidth:W03:max:1500mm min:400mm W04:max:1800mm min:400mmThickness:max:40mmControlled temperature range:0-300°Outline size:W03:2320X1940X1100mm W04:2320X2240X1100mmWeight:W03:1400KG W04:1700KG
It is the special equipment for processing the insulating glass of composite rubber strip.After installing the rubber strip between the two glass, by heating and rolling pressure ,to make the cavity of two empty glass obtain the lower of vacuum and dry static layer , the thickness and size reach the design standard of insulating glass. Adopt halogen heating pipe , high heating efficiency, longer life. Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive. Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed. The incubator produced by the resistant high temperature material is to prevent heat loss. Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy. The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.Main specification&Technical data:Power:380V 50HZTotal power:18.37KWMain drive power:0.37KWHeating power:18KWWidth:W03:max:1500mm min:400mm W04:max:1800mm min:400mmThickness:max:40mmControlled temperature range:0-300°Outline size:W03:2320X1940X1100mm W04:2320X2240X1100mmWeight:W03:1400KG W04:1700KG
Glass Heating Roller Press Mac
It is the special equipment for processing the insulating glass of composite rubber strip.After installing the rubber strip between the two glass, by heating and rolling pressure ,to make the cavity of two empty glass obtain the lower of vacuum and dry static layer , the thickness and size reach the design standard of insulating glass. Adopt halogen heating pipe , high heating efficiency, longer life. Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive. Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed. The incubator produced by the resistant high temperature material is to prevent heat loss. Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy. The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.Main specification&Technical data:Power:380V 50HZTotal power:18.37KWMain drive power:0.37KWHeating power:18KWWidth:W03:max:1500mm min:400mm W04:max:1800mm min:400mmThickness:max:40mmControlled temperature range:0-300°Outline size:W03:2320X1940X1100mm W04:2320X2240X1100mmWeight:W03:1400KG W04:1700KG
It is the special equipment for processing the insulating glass of composite rubber strip.After installing the rubber strip between the two glass, by heating and rolling pressure ,to make the cavity of two empty glass obtain the lower of vacuum and dry static layer , the thickness and size reach the design standard of insulating glass. Adopt halogen heating pipe , high heating efficiency, longer life. Adopting the stepless speed regulation mechanism can relize stepless speed regulation and smoothly drive. Adopting precision measurement systems can make the upper-lower rubber roller get the exact size needed. The incubator produced by the resistant high temperature material is to prevent heat loss. Four pairs of two different hardness rubber rollers can ensure to make the whole glass uniform pressure, and make the size of thickness accurate.The main components imported ensure stable operation of the equipment, reliable performance..The digital display temperature control equipment operate more handy. The shelf body is made of the high-quality carbon steel material, which is strong light ,the surface sprayed is anti-rust.Main specification&Technical data:Power:380V 50HZTotal power:18.37KWMain drive power:0.37KWHeating power:18KWWidth:W03:max:1500mm min:400mm W04:max:1800mm min:400mmThickness:max:40mmControlled temperature range:0-300°Outline size:W03:2320X1940X1100mm W04:2320X2240X1100mmWeight:W03:1400KG W04:1700KG
Glass Washing & Drying Mac
It is the efficient horizontal glass washing and drying machine,which can be used for cleaning and drying before insulating glass production, to ensure a clean surface.. This machine adopts horizontal frame design. The input of glass , washing, drying, the output of glass are automatically consecutive. The speed of glass transmission lines could be stepless speed regulation by the technological requirement according to the actual need .Stable performance, strong adaptability. Adopt the high-quality stepless speed regulation device, the speed is consecutive and adjustable , the washing result is good. The washing working procedure have the water disposed devices of two-grade to meet different water quality ,make sure that the degree of clean glass. Adopt the supply water systems of two-grade filtered of two-pump cycle, The clear and turbid water is distributary, and relizes conservation of water. All the cleaning parts and installation (including heating flange, temperature sensors, pipe, tank, etc.) are made of high-quality stainless steel material. It can be anti-corrosion, the water cycle doesnt plug, not rust. There were four brush cleaning match, forced brushing to make the glass cleanness better. Three sucking water rollers are made of the quality polymer material, It has a strong capacity to suck water, longer life. The rubber roller is made up of special rubber ?, formed by the grinding, good wear resistance, anti-aging, high accuracy. The slideway tank with telescopic can freely drive, It is very convenient to input water and inspect the water quality. Water tanks with steel glass plate can freely push and pull to prevent the dust submerged water source. The shelf is made of high-quality carbon steel material. The thickness of tube is 2.5mm . The shelf is handled to spray and coat.Main specification&Technical data:Thickness of glass:2-6mmWidth of glass:W01:max:1500mm min:450mm W02:max:1800mm min:450mmTotal power:13.03KWMain drive power:0.37KWBrush drive power:0.75KWFan power:0.55KWFan heating power:6KWPump power:0.36KWWater heating power:5KWSpeed of glass:0.75-3.70m/minPower:380V 50HZOutline size: W01:2000X1900X1100mm W02:2000X2200X1100mmWeight:W01:1500KGW02:2100KG
It is the efficient horizontal glass washing and drying machine,which can be used for cleaning and drying before insulating glass production, to ensure a clean surface.. This machine adopts horizontal frame design. The input of glass , washing, drying, the output of glass are automatically consecutive. The speed of glass transmission lines could be stepless speed regulation by the technological requirement according to the actual need .Stable performance, strong adaptability. Adopt the high-quality stepless speed regulation device, the speed is consecutive and adjustable , the washing result is good. The washing working procedure have the water disposed devices of two-grade to meet different water quality ,make sure that the degree of clean glass. Adopt the supply water systems of two-grade filtered of two-pump cycle, The clear and turbid water is distributary, and relizes conservation of water. All the cleaning parts and installation (including heating flange, temperature sensors, pipe, tank, etc.) are made of high-quality stainless steel material. It can be anti-corrosion, the water cycle doesnt plug, not rust. There were four brush cleaning match, forced brushing to make the glass cleanness better. Three sucking water rollers are made of the quality polymer material, It has a strong capacity to suck water, longer life. The rubber roller is made up of special rubber ?, formed by the grinding, good wear resistance, anti-aging, high accuracy. The slideway tank with telescopic can freely drive, It is very convenient to input water and inspect the water quality. Water tanks with steel glass plate can freely push and pull to prevent the dust submerged water source. The shelf is made of high-quality carbon steel material. The thickness of tube is 2.5mm . The shelf is handled to spray and coat.Main specification&Technical data:Thickness of glass:2-6mmWidth of glass:W01:max:1500mm min:450mm W02:max:1800mm min:450mmTotal power:13.03KWMain drive power:0.37KWBrush drive power:0.75KWFan power:0.55KWFan heating power:6KWPump power:0.36KWWater heating power:5KWSpeed of glass:0.75-3.70m/minPower:380V 50HZOutline size: W01:2000X1900X1100mm W02:2000X2200X1100mmWeight:W01:1500KGW02:2100KG
Digital Display Double-Head Pr
This machine used for aluminum profile and curtain wall profile cutting,that can double-cutting location,high production effiency,especially suitable for large-scale production. Automatic open and closed security protection device, the structural leakproofness good, so that can prevent sawdust splashed everyhere. Adopt CNC technology, the feed length can be shown in the? Installment feed length is precise and consistent. The machine body adopts the high-quality steel structural design, ensured the machine body good rigidity, anti-permanent deformation. High-quality imported aluminum with harden alloy saw balde, cutting performance stable and precise. High rotary precision spindle box ensured that the rotation of the impact, smooth and reliable, cutting section smooth, small burr. The feed mechanism adopts the air-liquid damping cylinder of famous brand.Slowly, the feed uniform;Fast,quick rotation.Motion smooth.Adopt imported solenoid valveliner guideway and liner bearing kinematic pair.With high motion precison and location accurate. Double saw can automatically convert the angle, relize the cutting of 22.5°45°and 90°.The machine head can quickly return,two direction location reliable and accurate. Main specification & Technical data:Repeat location precision:≤0.20mmCorner error:±5Cutter side vertical: ≤0.10mm/100mmCutter side plate: ≤0.05mmRoughness of cutting side:Ra12.5μmPower:380V 50HZ(three phase and four wire)Rated power:2X2.2KWSpindle speed: 2800rpmSpecification of cutter blade: φ500×4.4×φ30×Z120Max width of cutting: 135mmMax height of cutting :300mmRange of cutting length: 400-4200mmAngle of cutting: 45°90°22.5°67.5°Working speed: stepless regulation:0-3000mm/minAir pressure: 0.5-0.8MPaAir consumption:200L/minOutline size:5500×1750×1950mm(LxWxH)Weight:1800KG
This machine used for aluminum profile and curtain wall profile cutting,that can double-cutting location,high production effiency,especially suitable for large-scale production. Automatic open and closed security protection device, the structural leakproofness good, so that can prevent sawdust splashed everyhere. Adopt CNC technology, the feed length can be shown in the? Installment feed length is precise and consistent. The machine body adopts the high-quality steel structural design, ensured the machine body good rigidity, anti-permanent deformation. High-quality imported aluminum with harden alloy saw balde, cutting performance stable and precise. High rotary precision spindle box ensured that the rotation of the impact, smooth and reliable, cutting section smooth, small burr. The feed mechanism adopts the air-liquid damping cylinder of famous brand.Slowly, the feed uniform;Fast,quick rotation.Motion smooth.Adopt imported solenoid valveliner guideway and liner bearing kinematic pair.With high motion precison and location accurate. Double saw can automatically convert the angle, relize the cutting of 22.5°45°and 90°.The machine head can quickly return,two direction location reliable and accurate. Main specification & Technical data:Repeat location precision:≤0.20mmCorner error:±5Cutter side vertical: ≤0.10mm/100mmCutter side plate: ≤0.05mmRoughness of cutting side:Ra12.5μmPower:380V 50HZ(three phase and four wire)Rated power:2X2.2KWSpindle speed: 2800rpmSpecification of cutter blade: φ500×4.4×φ30×Z120Max width of cutting: 135mmMax height of cutting :300mmRange of cutting length: 400-4200mmAngle of cutting: 45°90°22.5°67.5°Working speed: stepless regulation:0-3000mm/minAir pressure: 0.5-0.8MPaAir consumption:200L/minOutline size:5500×1750×1950mm(LxWxH)Weight:1800KG
Milling machine for the end fa
Performance characteristicIt is used for milling the end faces of aluminum and pvc door/window.Suitable for milling the end faces of aluminum and pvc profile, rectangular groove, rabbet and profile in -55 ° +55 ° angle with the other different shapes.Suitable for aluminum and pvc profile adopted welding technics of 45 ° processing. Accurate locating and higher efficiency. The national patent (No.: ZL200420055403.8).Mill 2 radix profiles at the same time, the productivity is two times of original situation.Two can be adjusted , wide scope of processing profile , a wide range of profiles.The main spindle of high precision makes the processing accuracy higher and more stable.The spindle of cutter by the linking , the motor axial and radial error do not affect cutter precision.The feed system with linear axletree motion bearing makes the works performance stable and reliable.The milling cutter and worktable can adjust to be high ,that is convenient to adjust.Main specification & Technical data:Power:380V 50HZAir pressure:0.5-0.8MpaRated power:1.5KWSpindle speed :2800rpmMax diameter of milling cutter:200mmMax scope of milling :200X70X45mmWorktable movement distance:0-80mmMax width of milling cutter90mmMain accessory:Motor----Huangshan SanyangCylinder----Shanghai XinyiSolenoid valve---- Japan KoganeiSwitch button----Hangzhou Sanli
Performance characteristicIt is used for milling the end faces of aluminum and pvc door/window.Suitable for milling the end faces of aluminum and pvc profile, rectangular groove, rabbet and profile in -55 ° +55 ° angle with the other different shapes.Suitable for aluminum and pvc profile adopted welding technics of 45 ° processing. Accurate locating and higher efficiency. The national patent (No.: ZL200420055403.8).Mill 2 radix profiles at the same time, the productivity is two times of original situation.Two can be adjusted , wide scope of processing profile , a wide range of profiles.The main spindle of high precision makes the processing accuracy higher and more stable.The spindle of cutter by the linking , the motor axial and radial error do not affect cutter precision.The feed system with linear axletree motion bearing makes the works performance stable and reliable.The milling cutter and worktable can adjust to be high ,that is convenient to adjust.Main specification & Technical data:Power:380V 50HZAir pressure:0.5-0.8MpaRated power:1.5KWSpindle speed :2800rpmMax diameter of milling cutter:200mmMax scope of milling :200X70X45mmWorktable movement distance:0-80mmMax width of milling cutter90mmMain accessory:Motor----Huangshan SanyangCylinder----Shanghai XinyiSolenoid valve---- Japan KoganeiSwitch button----Hangzhou Sanli
Manual face miller for ALU and
Performance characteristicIt is the specialized equipment for milling the face of aluminum and pvc profile,can be used for milling the mullion profile face of the aluminum and pvc profile door/ window. Can also be used for milling the assembled face of aluminum and pvc door /window. Replacement of the different face-milling cutter may mill different face profiles.Work manual, pneumatic driving clamped , flexible and convenient. The product number X05 is the arbitrary installation type. Moving convenient, not only can be taken leveling at work, but also three feet contacting the ground can be taken apart with screw fastening worktable at work..Main specification & Technical data:Power:380V 50HZRated power:1.5KWSpindle speed:1140rpmDiameter of milling cutter: φ100-φ160mmAir pressure :0.4-0.6MpaAir consumption:30L/minOutline size:X04:550X650X1450mm(LxWxH) X05:550X650X700mm(LxWxH)Main accessory :Motor-----Huangshan SanyangCylinder----Shanghai Xinyi
Performance characteristicIt is the specialized equipment for milling the face of aluminum and pvc profile,can be used for milling the mullion profile face of the aluminum and pvc profile door/ window. Can also be used for milling the assembled face of aluminum and pvc door /window. Replacement of the different face-milling cutter may mill different face profiles.Work manual, pneumatic driving clamped , flexible and convenient. The product number X05 is the arbitrary installation type. Moving convenient, not only can be taken leveling at work, but also three feet contacting the ground can be taken apart with screw fastening worktable at work..Main specification & Technical data:Power:380V 50HZRated power:1.5KWSpindle speed:1140rpmDiameter of milling cutter: φ100-φ160mmAir pressure :0.4-0.6MpaAir consumption:30L/minOutline size:X04:550X650X1450mm(LxWxH) X05:550X650X700mm(LxWxH)Main accessory :Motor-----Huangshan SanyangCylinder----Shanghai Xinyi
Glazing bead saw
Equipped with location shelf ,positioning devices can quickly measure the size of location.Used for the positioning of the cutting, can guarantee that the relative size precision in the cutting glass bead time. Clear the error of post-processing ? and glass bead assembled. The slight tuning device can adjust the tightness of the cutted bead which is installed according to actual need, feeding material by the gauge. Cutter feed smooth and reliable, high production efficiency, longer life.Power:380V/220V 50HZRated power :2X0.75KWSpindle speed:2800rpmAir consumption:80L/minScope of processing: J14: Locating length of milling:300-1700mm Depth of milling :≤65mm J15:Scope of processing length:320-1800mmOutline size:1400X550X1350mmMain accessory:Motor---Huangshan SanyangSolenoid valve---- Japan KoganeiCylinder---Shanghai XinyiAir-way connected body----Shanghai XinyiSaw blade----Japan Xinfeng
Equipped with location shelf ,positioning devices can quickly measure the size of location.Used for the positioning of the cutting, can guarantee that the relative size precision in the cutting glass bead time. Clear the error of post-processing ? and glass bead assembled. The slight tuning device can adjust the tightness of the cutted bead which is installed according to actual need, feeding material by the gauge. Cutter feed smooth and reliable, high production efficiency, longer life.Power:380V/220V 50HZRated power :2X0.75KWSpindle speed:2800rpmAir consumption:80L/minScope of processing: J14: Locating length of milling:300-1700mm Depth of milling :≤65mm J15:Scope of processing length:320-1800mmOutline size:1400X550X1350mmMain accessory:Motor---Huangshan SanyangSolenoid valve---- Japan KoganeiCylinder---Shanghai XinyiAir-way connected body----Shanghai XinyiSaw blade----Japan Xinfeng
High efficiency CNC corner com
It is the specialized machine for cleaning the welding knurl of pvc door /window corner .This machine is multifunctional cleaning corner device with the CNC, pneumatic, electromechanical technology.According to different series profiles , it can set and store more than 100 species of processing programe. Plate milling cutter will cut a two-dimensional trajectory of pvc door /window exterior corner under the setting programe. According to the working steps ,the broach on the upper-lower automatically cleans the remaining welding knurl of upper-lower plane. Meantime, Clean the superfluous plastic welding knurl of PVC window sealed slot and interior angle for two groups of the upper and lower milling cutter , so that it is handy to install the seal. Freely modify processing programe according to actual working situation, so that can meet the technological requirements. Adopting the two-axis CNC system and G-code programming, then the size error is compensated. The function of compensation can.be relized the difference between arc and diagonal CNC system corresponding speed, adopt a senior international common language code. Touchscreen adopts the self-definition language. The speed of processing can be adjusted at any time on the dynamic condition. Processing data adjustment and speed adjustment is simple, convenient.Main specification&Technical data:Power:380V 50HZRated power:0.55KWAir pressure :0.5-0.8MpaAir consumption:Q01:150L/min Q02:60L/minProfile height:30-125mmProfile width:30-110mmMain milling cutter spindle speed:2800rpmOutline size:Q01:1550X2550X1850mm Q02:1050X1930X1500mmWeight:Q01:720KG Q02:640KGMain accessory: Cylinder---Ningbo JMCShanghai Xinyi Solenoid Valve---- Japan KoganeiEdeke Photoelectric switch----Japan OMRON Main Motor---Huangshan Sanyang Drive Motor----Hangzhou Zhongda
It is the specialized machine for cleaning the welding knurl of pvc door /window corner .This machine is multifunctional cleaning corner device with the CNC, pneumatic, electromechanical technology.According to different series profiles , it can set and store more than 100 species of processing programe. Plate milling cutter will cut a two-dimensional trajectory of pvc door /window exterior corner under the setting programe. According to the working steps ,the broach on the upper-lower automatically cleans the remaining welding knurl of upper-lower plane. Meantime, Clean the superfluous plastic welding knurl of PVC window sealed slot and interior angle for two groups of the upper and lower milling cutter , so that it is handy to install the seal. Freely modify processing programe according to actual working situation, so that can meet the technological requirements. Adopting the two-axis CNC system and G-code programming, then the size error is compensated. The function of compensation can.be relized the difference between arc and diagonal CNC system corresponding speed, adopt a senior international common language code. Touchscreen adopts the self-definition language. The speed of processing can be adjusted at any time on the dynamic condition. Processing data adjustment and speed adjustment is simple, convenient.Main specification&Technical data:Power:380V 50HZRated power:0.55KWAir pressure :0.5-0.8MpaAir consumption:Q01:150L/min Q02:60L/minProfile height:30-125mmProfile width:30-110mmMain milling cutter spindle speed:2800rpmOutline size:Q01:1550X2550X1850mm Q02:1050X1930X1500mmWeight:Q01:720KG Q02:640KGMain accessory: Cylinder---Ningbo JMCShanghai Xinyi Solenoid Valve---- Japan KoganeiEdeke Photoelectric switch----Japan OMRON Main Motor---Huangshan Sanyang Drive Motor----Hangzhou Zhongda
Copy-routing drilling machine
Adopt the milling cutter of import original aluminum alloy.Exclusive design with three holes drilling-milling adjustment mechanism , convenient, practical and high efficiency.Milling size and the roughness of processing surface have a leading level.Three-hole-drilling can be completed the processing of pvc-steel keyhole in one time.Main specification&Technical data:Power:380V 50HZ Rated power:1.85KWSpindle speed:2800rpmAir pressure :0.5-0.8MpaDiameter of milling cutter:φ5mm φ8mmSpindle speed of milling cutter:11200rpm/910rpmScope of milling:290X90mmHole size error:±0.1mmHole position error:±0.2mmMilling section roughness: Ra12.5μmOutline size:950X1000X1300(LxWxH)Weight:270KGMain accessory:Motor----Japan Cylinder----Japan (NTN)Highspeed frequency belt---Northesst YongyuanMilling cutter-----Germany
Adopt the milling cutter of import original aluminum alloy.Exclusive design with three holes drilling-milling adjustment mechanism , convenient, practical and high efficiency.Milling size and the roughness of processing surface have a leading level.Three-hole-drilling can be completed the processing of pvc-steel keyhole in one time.Main specification&Technical data:Power:380V 50HZ Rated power:1.85KWSpindle speed:2800rpmAir pressure :0.5-0.8MpaDiameter of milling cutter:φ5mm φ8mmSpindle speed of milling cutter:11200rpm/910rpmScope of milling:290X90mmHole size error:±0.1mmHole position error:±0.2mmMilling section roughness: Ra12.5μmOutline size:950X1000X1300(LxWxH)Weight:270KGMain accessory:Motor----Japan Cylinder----Japan (NTN)Highspeed frequency belt---Northesst YongyuanMilling cutter-----Germany
Corner combining machine
This machine is used for corner punching and riveting combination of aluminum doors& windows. Two corner connecting at one time as available greatly increased the production.The pressing and locating machinsm can adjust in upper and lower direction, suitable for various kinds specification & section profile. The combing corner and feed operate at will, can highly reduce the inferior product ratio.Main specification & Technical data:Touch error:≤0.15mmPower:380V 50HZ (Three phase and four wire)Rated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.2L/timeTank capacity:40LMin distance of two head:450mmMax distance of two head:1800mmWidth of aluminum profile:100mmOutline size:2880X2300X1359mm(LxWxH)Weight:500KGMain accessory: 8mm thickness rectangular tube------Angang provide Hydraulic systemTaiwan gear pumpSolenoid valveSafety wire Round slideway brush------Korea Taiking Corner combing cutter
This machine is used for corner punching and riveting combination of aluminum doors& windows. Two corner connecting at one time as available greatly increased the production.The pressing and locating machinsm can adjust in upper and lower direction, suitable for various kinds specification & section profile. The combing corner and feed operate at will, can highly reduce the inferior product ratio.Main specification & Technical data:Touch error:≤0.15mmPower:380V 50HZ (Three phase and four wire)Rated oil pressure:15MpaAir pressure:0.5-0.8MpaAir consumption:0.2L/timeTank capacity:40LMin distance of two head:450mmMax distance of two head:1800mmWidth of aluminum profile:100mmOutline size:2880X2300X1359mm(LxWxH)Weight:500KGMain accessory: 8mm thickness rectangular tube------Angang provide Hydraulic systemTaiwan gear pumpSolenoid valveSafety wire Round slideway brush------Korea Taiking Corner combing cutter
